Closed Loop Voltage Mode Controlled High Step-Down/Step-Up Positive Output Buck–Boost Converter

  • Ramanjaneya Reddy Udumula Vardhaman College of Engineering, Hyderabad
  • Deepika Hanumandla Vardhaman College of Engineering, Hyderabad
  • Vijayalakshmi Bellapu Vardhaman college of engineering, Hyderabad

Abstract

This work presents the positive output buck–boost (POBB) converter with single loop control and simple converter structure. The presented POBB converter achieves the square of the high step-down/step-up voltage conversion gain as compared with the traditional buck–boost (TBB) converter and also the output voltage polarity is positive. These advanced features facilitate work in a wider range of high-step-down/step-up positive output converters. In the high gain POBB converter the two controlled power switches are operated synchronously. The converter is designed to operate in continuous current mode (CCM), one in switch-on mode, during which the two inductors are energized and two capacitors are discharged, and the later one in switch-off mode, during which the two inductors are de-energized and two capacitors are charged. The operating principles and the steady-state analysis of high step-don/step-up POBB converter operating in CCM are presented in detail. Further, a closed loop voltage mode control (VMC) is designed and simulated to study the line and load regulations of POBB converter in both high step-down (buck mode) and high step-up (boost modes) respectively. Theoretical analysis and predictions of the closed loop VMC POBB converter have been validated using MATLAB/Simulink platform.

Author Biographies

Ramanjaneya Reddy Udumula, Vardhaman College of Engineering, Hyderabad
Electrical and Electronics Engineering
Deepika Hanumandla, Vardhaman College of Engineering, Hyderabad
Electrical and Electronics Engineering
Vijayalakshmi Bellapu, Vardhaman college of engineering, Hyderabad
Electrical and Electronics Engineering

References

1. W. H. Li, X. N. He. Review of non-isolated high step-up DC/DC converters in photovoltaic grid-connected applications,. IEEE Transactions on Industrial Electronics, vol. 58, no. 4, pp. 1239–1250, (Apr 2011).Edit

2. U Ramanjaneya Reddy, B L Narasimharaju. Unity power factor buck-boost led driver for wide range of input voltage application,. In IEEE India Conference (INDICON), pp. 1-6, New Delhi,. (2015).Edit

3. U Ramanjaneya Reddy, B L Narasimharaju. Single-stage electrolytic capacitor less non-inverting buck-boost pfc based ac–dc ripple free led driver,. IET Power Electronics, 10 (1), 38–46, (2017).Edit

4. T. F. Wu, Y. K. Chen. Modeling PWM DC-DC converters out of basic converter units,. IEEE Transactions on Power Electronics, vol. 13, no. 5, pp. 870-881, (Sep 1998).Edit

5. U Ramanjaneya Reddy, B L Narasimharaju. Enhanced closed loop voltage control of buck converter for improved performance,. In IEEE India Conference (INDICON), pp. 1–5, Pune,. (2014).Edit

6. U Ramanjaneya Reddy, B L Narasimharaju. Improved efficiency coupled inductor-buck ac-dc light emitting diode (led) driver,. IEICE Electronics Express, 13 (16), (2016).Edit

7. F. L. Luo. Six self-lift DC–DC converters, voltage lift technique,. IEEE Transactions on Industrial Electronics, vol. 48, no. 6, pp. 1268–1272, (Dec 2001).Edit

8. W. C. Lin Y. T. Chen, R. H. Liang. An interleaved high step-up DC– DC converter with double boost paths,. International Journal of Circuit Theory and Applications, vol. 43, no. 8, pp. 967–983, (Aug 2015).Edit

9. Y. M. Ye, K. W. E. Cheng. Quadratic boost converter with low buffer capacitor stress,. IET Power Electronics, vol. 7, no. 5, pp. 1162–1170, (May 2014).Edit

10. Y. Ye, K. W. E. Cheng. A family of single-stage switched-capacitor– inductor PWM converters,. IEEE Transactions on Power Electronics, vol. 28, no. 11, pp. 5196–5205, (Nov. 2013).Edit

11. K. I. Hwu, Y. T. Yau. High step-up converter based on charge pump and boost converter. IEEE Transactions on Power Electronics, vol. 27, no. 5, pp. 2484–2494, (May 2012).Edit

12. H. Ardi A. Ajami, A. Farakhor. Design, analysis and implementation of a buck–boost DC/DC converter,. IET Power Electronics 7 (12) (2014), pp.2902–2913, (2014).Edit

13. U Ramanjaneya Reddy, B L Narasimharaju. High step-down dual output light emitting diode driver,. International Journal of Renewable Energy Research, 7 (1), pp.157–169, (2017).Edit

14. U Ramanjaneya Reddy, B L Narasimharaju, Asif Md. Voltage mode control dcm hsd-cib pfc converter for hb-led lighting applications,. Journal of Power Technologies, 98 (4), pp.305–313, (2018).Edit

15. U Ramanjaneya Reddy, B L Narasimharaju. A cost-effective zero-voltage switching dual-output led driver,. IEEE Transactions on Power Electronics, 32 (10), pp.7941–7953, (2016).Edit

16. B L Narasimharaju, U Ramanjaneya Reddy, R Dogga. Design and analysis of voltage clamped bidirectional dc–dc converter for energy storage applications,. IET Journal of Engineering, 2018 (7), pp.367–374, (2018).Edit

17. Ramanjaneya Reddy U Kalyan Kumar Koppolu. Design of Dimmable Light Emitting Diode Driver for Low Power Applications,. Journal of Power Technologies 99 (3) (2019) 204–209, (2019).Edit
Published
2020-09-19
How to Cite
UDUMULA, Ramanjaneya Reddy; HANUMANDLA, Deepika; BELLAPU, Vijayalakshmi. Closed Loop Voltage Mode Controlled High Step-Down/Step-Up Positive Output Buck–Boost Converter. Journal of Power Technologies, [S.l.], v. 100, n. 3, p. 255-262, sep. 2020. ISSN 2083-4195. Available at: <https://papers.itc.pw.edu.pl/index.php/JPT/article/view/1682>. Date accessed: 14 mar. 2025.
Citation Formats
Issue
Vol 100 No 3 (2020)
Section
Power Converters

Keywords

Positive output buck-boost (POBB) Converter, Continuous current mode (CCM), Traditional buck-boost (TBB) converter, voltage mode control, line and load regulation.
Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.