Experimental modeling of the flashover of polluted insulator in the presence of a metal plate using RSM technique
Abstract
Flashover of polluted insulators has been the subject of many experimental and numerical research papers. Several mathematicalmodels of flashover voltage have been proposed in terms of current, discharge length, electrolyte length and resistivity.However, there is no model as yet based on the geometric factors of the electrolyte channel—such as width and depth—andthe interaction between them. Furthermore, as very few research papers have been published about discharge elongationin the presence of a metal object between the electrodes, the aim of the present work is to model flashover voltage in thepresence of a metal plate, dipped in electrolyte or placed on its surface. Two mathematical models were obtained usingresponse surface modeling and they were used in the analysis of the effect of geometric factors on the flashover discharge.References
[1] X. Jiang, J. Yuan, Z. Zhang, J. Hu, L. Shu, Study on pollution flashover
performance of short samples of composite insulators intended for/spl
plusmn/800 kv uhv dc, IEEE Transactions on Dielectrics and Electrical
Insulation 14 (5).
[2] C.-x. SUN, L.-c. SHU, X.-l. JIANG, W.-x. SIMA, L.-g. GU, Ac/dc
flashover performance and its voltage correction of uhv insulators in
high altitude and icing and pollution environments [j], Proceedings of
the Csee 11 (2002) 024.
[3] Z. Su, Q. LI, Historical review and summary on measures against pollution
flashover occurred in power grids in china [j], Power System
Technology 12 (2010) 124–130.
[4] R. Wilkins, Flashover voltage of high-voltage insulators with uniform
surface-pollution films, in: Proceedings of the Institution of Electrical
Engineers, Vol. 116, IET, 1969, pp. 457–465.
[5] R. Sundararajan, R. Gorur, Dynamic arc modeling of pollution
flashover of insulators under dc voltage, IEEE Transactions on electrical
insulation 28 (2) (1993) 209–218.
[6] P. Ghosh, N. Chatterjee, Polluted insulator flashover model for ac voltage,
IEEE Transactions on Dielectrics and Electrical insulation 2 (1)
(1995) 128–136.
[7] Z. Aydogmus, M. Cebeci, A new flashover dynamic model of polluted
hv insulators, IEEE Transactions on Dielectrics and Electrical Insulation
11 (4) (2004) 577–584.
[8] N. Dhahbi-Megriche, A. Beroual, L. Krähenbühl, A new proposal model
for flashover of polluted insulators, Journal of Physics D: Applied
Physics 30 (5) (1997) 889.
[9] D. Swift, Flashover across the surface of an electrolyte: arresting arc
propagation with narrow metal strips, IEE Proceedings A (Physical
Science, Measurement and Instrumentation, Management and Education,
Reviews) 127 (8) (1980) 553–564.
[10] R. Wilkins, A. Al-Baghdadi, Arc propagation along an electrolyte surface,
in: Proceedings of the Institution of Electrical Engineers, Vol. 118,
IET, 1971, pp. 1886–1892.
[11] S. Flazi, N. Boukhennoufa, A. Ouis, Critical condition of dc flashover on
a circular sector model, IEEE transactions on dielectrics and electrical
insulation 13 (6).
[12] N. L. Frigon, D. Mathews, Practical guide to experimental design, John
Wiley & Sons, 1997.
[13] G. Taguchi, G. Taguchi, System of experimental design; engineering
methods to optimize quality and minimize costs, Tech. rep. (1987).
[14] L. Eriksson, E. Johansson, N. Kettaneh-Wold, C. Wikström, S. Wold,
Design of experiments, Principles and applications (2000) 172–174.
[15] H. Anglart, Modeling of liquid film flow in annuli, Journal of Power Technologies
94 (5) (2015) 8–15.
[16] L. Eriksson, E. Johansson, N. Kettaneh-Wold, C. Wikström, S. Wold,
Design of experiments, Principles and applications (2000) 172–174.
[17] A. Umetrics, Modde 5.0. user guide and tutorial, Umetrics, Umea,
Sweden.
[18] F. S., Study of flashover polluted insulators ht elongation criteria of
the landfill and dynamics of the phenomenon, Master’s thesis, Paul
Sabatier University, Toulouse (1987).
[19] S. Flazi, N. Boukhennoufa, H. Hadi, F. Taleb, The criterion of dc
flashover on a circular sector models, in: Electrical Insulation and
Dielectric Phenomena, 2003. Annual Report. Conference on, IEEE,
2003, pp. 277–280.
performance of short samples of composite insulators intended for/spl
plusmn/800 kv uhv dc, IEEE Transactions on Dielectrics and Electrical
Insulation 14 (5).
[2] C.-x. SUN, L.-c. SHU, X.-l. JIANG, W.-x. SIMA, L.-g. GU, Ac/dc
flashover performance and its voltage correction of uhv insulators in
high altitude and icing and pollution environments [j], Proceedings of
the Csee 11 (2002) 024.
[3] Z. Su, Q. LI, Historical review and summary on measures against pollution
flashover occurred in power grids in china [j], Power System
Technology 12 (2010) 124–130.
[4] R. Wilkins, Flashover voltage of high-voltage insulators with uniform
surface-pollution films, in: Proceedings of the Institution of Electrical
Engineers, Vol. 116, IET, 1969, pp. 457–465.
[5] R. Sundararajan, R. Gorur, Dynamic arc modeling of pollution
flashover of insulators under dc voltage, IEEE Transactions on electrical
insulation 28 (2) (1993) 209–218.
[6] P. Ghosh, N. Chatterjee, Polluted insulator flashover model for ac voltage,
IEEE Transactions on Dielectrics and Electrical insulation 2 (1)
(1995) 128–136.
[7] Z. Aydogmus, M. Cebeci, A new flashover dynamic model of polluted
hv insulators, IEEE Transactions on Dielectrics and Electrical Insulation
11 (4) (2004) 577–584.
[8] N. Dhahbi-Megriche, A. Beroual, L. Krähenbühl, A new proposal model
for flashover of polluted insulators, Journal of Physics D: Applied
Physics 30 (5) (1997) 889.
[9] D. Swift, Flashover across the surface of an electrolyte: arresting arc
propagation with narrow metal strips, IEE Proceedings A (Physical
Science, Measurement and Instrumentation, Management and Education,
Reviews) 127 (8) (1980) 553–564.
[10] R. Wilkins, A. Al-Baghdadi, Arc propagation along an electrolyte surface,
in: Proceedings of the Institution of Electrical Engineers, Vol. 118,
IET, 1971, pp. 1886–1892.
[11] S. Flazi, N. Boukhennoufa, A. Ouis, Critical condition of dc flashover on
a circular sector model, IEEE transactions on dielectrics and electrical
insulation 13 (6).
[12] N. L. Frigon, D. Mathews, Practical guide to experimental design, John
Wiley & Sons, 1997.
[13] G. Taguchi, G. Taguchi, System of experimental design; engineering
methods to optimize quality and minimize costs, Tech. rep. (1987).
[14] L. Eriksson, E. Johansson, N. Kettaneh-Wold, C. Wikström, S. Wold,
Design of experiments, Principles and applications (2000) 172–174.
[15] H. Anglart, Modeling of liquid film flow in annuli, Journal of Power Technologies
94 (5) (2015) 8–15.
[16] L. Eriksson, E. Johansson, N. Kettaneh-Wold, C. Wikström, S. Wold,
Design of experiments, Principles and applications (2000) 172–174.
[17] A. Umetrics, Modde 5.0. user guide and tutorial, Umetrics, Umea,
Sweden.
[18] F. S., Study of flashover polluted insulators ht elongation criteria of
the landfill and dynamics of the phenomenon, Master’s thesis, Paul
Sabatier University, Toulouse (1987).
[19] S. Flazi, N. Boukhennoufa, H. Hadi, F. Taleb, The criterion of dc
flashover on a circular sector models, in: Electrical Insulation and
Dielectric Phenomena, 2003. Annual Report. Conference on, IEEE,
2003, pp. 277–280.
Published
2018-01-29
How to Cite
BOUHMAMA, Mohamed et al.
Experimental modeling of the flashover of polluted insulator in the presence of a metal plate using RSM technique.
Journal of Power Technologies, [S.l.], v. 97, n. 4, p. 342–346, jan. 2018.
ISSN 2083-4195.
Available at: <https://papers.itc.pw.edu.pl/index.php/JPT/article/view/871>. Date accessed: 25 apr. 2024.
Issue
Section
Electrical Engineering
Keywords
polluted insulator; flashover; RSM technique; modeling
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
